⚠️ The above quantity is estimated by the website calculator for reference only. Actual consumption may vary. Please confirm with our team.
📋 Product specifications are for reference only.
All product details should refer to the official manufacturer documents. For official product data sheets or technical enquiries, please contact us via WhatsApp.
Quick Summary:
Monoprufe WS is a flexible cementitious waterproofing slurry from Sika Ronacrete. Two-component system (powder + liquid) applied by spray, roller or brush. Slightly flexible, seals static cracks and capillaries. Suitable for bathrooms, basements, pools and water-retaining structures. Non-toxic, low VOC, contributes to LEED certification.
Features
Suitable for horizontal and vertical surfaces
Easy to mix and apply
Seals static cracks and capillaries
Compatible with cementitious substrates and renders
Slightly flexible — accommodates minor structural movement
Good adhesion
Impermeable to water
Multiple application methods — spray, roller or brush
Combines flexibility with impermeability to effectively seal static cracks and capillaries. Two-component design ensures consistent quality. Tested to HKHA MTS specifications. Compatible with Sika SealTape F for enhanced water-tightness in wet areas.
Packaging
Available in small, medium and large packs (powder + liquid), suitable for different project scales.
Monoprufe WS vs WP vs WM
Product
Flexibility
Best For
Feature
Monoprufe WS
Slightly flexible
Bathrooms/basements/pools
General-purpose waterproofing, LEED
Monoprufe WP
Highly flexible
Pools/tanks/basements
Cold-applied flexible membrane
Monoprufe WM
Standard
Kitchens/bathrooms/tanks
Waterproof mortar
Important Notes
Remove all grease and loose particles; dampen absorbent substrates
Apply two coats at right angles; allow proper curing between coats
Avoid application in direct sunlight or drying winds; do not re-work or add water
Use with Sika SealTape F for enhanced water-tightness at joints
Clean tools immediately with water
For detailed application methods, coverage rates and technical parameters, refer to the official product data sheet
FAQ
What is the difference between Monoprufe WS and WP?
WS is slightly flexible, suitable for general bathroom and basement waterproofing. WP offers higher flexibility for greater structural movement, better for pools and tanks.
What Monoprufe products are available?
The range includes Monoprufe WS (general), WP (high flexibility), WM (mortar) and RTU 801 (ready-to-use). Choose based on project requirements.
How much does Monoprufe WS cost?
Contact us via WhatsApp for pricing. Collection from Mong Kok store or Hong Kong delivery available.
From 16 July 2026 the Joint Office runs a new seepage investigation procedure: an Advisory Repair Notice within ~14 working days, 28 days to self-repair. This guide covers the new...
From 16 July 2026 the Joint Office runs a new seepage investigation procedure: an Advisory Repair Notice within ~14 working days, 28 days to self-repair. This guide covers the new...
Compare flexible waterproof cement coatings with polymer bonding agents (SBR/EVA additives) for bathroom, kitchen, and rooftop waterproofing. Learn when to use each type and browse recommended products from Weber, Sika,...
Compare flexible waterproof cement coatings with polymer bonding agents (SBR/EVA additives) for bathroom, kitchen, and rooftop waterproofing. Learn when to use each type and browse recommended products from Weber, Sika,...
How to Order
Enquiry & Order
Contact us via WhatsApp or visit our store in Mong Kok
Arrange Delivery
Schedule delivery or pick up from our store
Payment
Cash, FPS, EPS accepted
Choosing a selection results in a full page refresh.