馬貝 Mapei ADESILEX PG2 / 6KG

Adesilex PG1 和 Adesilex PG2 是由環氧樹脂、選用的細粒骨料和特別添加劑製成的雙組分產品。這些產品專為結構修復、粘合和加固混凝土構件、天然石材、砂漿和磚塊設計，並具有非常低的揮發性有機化合物排放（EMICODE EC1 Plus）。

主要特點：

• 結構加固： 用於連接鋼板（béton plaqué 方法）或複合材料（如 Carboplate）板到混凝土以加固樑和柱。
• 結構粘合： 適用於預製混凝土構件的非彈性結構粘合。
• 裂縫修補： 在注入 Epojet 之前，密封注射器和表面損壞。
• 工業地板修復： 修補工業地板中受交通影響的大裂縫和接縫角。
• 纖維增強混凝土： 與纖維增強水泥板和管道粘合。
• 防水密封： 通過粘合 TPE 條帶（例如 Mapeband TPE）來防水大尺寸接縫。

典型用途：

• 樑和柱的結構加固
• 預製混凝土構件的粘合
• 注入前的裂縫密封
• 工業地板中大裂縫和接縫角的修復
• 纖維增強水泥板和管道的粘合
• 大尺寸接縫的防水密封

Adesilex PG1 and Adesilex PG2 are two-component products based on epoxy resins, selected fine-grain aggregates, and special additives. These products are designed for structural repair, bonding, and reinforcement of concrete elements, natural stone, mortar, and brick, with very low emissions of volatile organic compounds (EMICODE EC1 Plus).

Key Features:

• Structural Reinforcement: Used for bonding steel (béton plaqué method) or composite material (e.g., Carboplate) plates to concrete for reinforcing beams and pillars.
• Structural Bonding: Suitable for non-flexible structural bonding of precast concrete elements.
• Crack Sealing: Seals injectors and surface damage before the injection of Epojet.
• Industrial Flooring Repair: Repairs large cracks and joint corners in industrial flooring subject to traffic.
• Fiber-Reinforced Concrete: Bonds fiber-reinforced cement slabs and pipes.
• Waterproof Sealing: Waterproofs large joints by bonding TPE strips (e.g., Mapeband TPE) to concrete.

Typical Usage:

• Structural reinforcement of beams and pillars
• Bonding of precast concrete elements
• Sealing of cracks before injection
• Repair of large cracks and joint corners in industrial flooring
• Bonding fiber-reinforced cement slabs and pipes
• Waterproof sealing of large joints