奧迪美 Optimix NS612 Non-Shrink Grout 無收縮灌漿 / 40KG

奧迪美 NS612 無收縮灌漿是一種高質量的預拌、收縮補償、優質水泥基灌漿料。該產品具有雙時段膨脹特性，在塑性階段和硬化期均產生收縮補償作用。只需加入適量清水並加以攪拌，即可成為高流態、可灌注可批刮的無收縮灌漿料，適用於底板、軸承、錨和各種混凝土修補等廣泛用途。奧迪美 NS612 已獲得 PCCS-RM S 級認證。

主要優點

• 品質穩定
• 簡單易用
• 收縮補償
• 低氯離子含量
• 高早期及最終抗壓強度
• 無泌水
• 高流態性
• PCCS-RM S 級認證
• 高成本效益

一般用途

• 填充混凝土孔洞
• 用於基底和底板間以作支撐
• 可用作螺栓、鋼筋搭接、支座等提供高強度的支撐及固定
• 填充鋼結構、柱樑接頭、螺絲孔洞及預製件之間空隙
• 填充骨料空間，固定岩錨
• 可作機械設備的支撐台，如樑柱接頭、橋樑支座、電車軌道、水箱等
• 岩土灌漿，如錨桿、土釘和管棚等

Optimix NS612 Non-Shrink Grout is a high-quality, pre-mixed, shrinkage-compensating, premium cement-based grout. It features dual-phase expansion properties, providing shrinkage compensation during both the plastic and hardening stages. By simply adding an appropriate amount of water and mixing, it becomes a highly flowable, pourable, and trowelable non-shrink grout suitable for a wide range of applications such as base plates, bearings, anchors, and various concrete repairs. Optimix NS612 has been certified to PCCS-RM S grade.

Key Features

• Stable quality
• Easy to use
• Shrinkage compensation
• Low chloride ion content
• High early and final compressive strength
• No bleeding
• High fluidity
• PCCS-RM S grade certification
• High cost-effectiveness

Typical Usage

• Filling concrete voids
• Providing support between base and base plates
• High-strength support and fixation for bolts, rebar lap joints, and bearings
• Filling gaps in steel structures, column-beam joints, bolt holes, and precast elements
• Filling aggregate spaces and securing rock anchors
• Support platforms for machinery, such as column-beam joints, bridge bearings, tram tracks, water tanks, etc.
• Geotechnical grouting, such as rock bolts, soil nails, and pipe roofs