Weber Weberset 303 C1TE Tile Adhesive / 40KG
Weber Weberset 303 C1TE Tile Adhesive / 40KG
📋 Product specifications are for reference only.
All product details should refer to the official manufacturer documents. For official product data sheets or technical enquiries, please contact us via WhatsApp.
Weberset 303 C1TE Tile Adhesive：A single-component water-resistant cementitious tile adhesive classified EN 12004 C1TE, with slip resistance, extended open time and good workability for specified interior and exterior wall and floor tiling.
Product description
A single-component water-resistant cementitious tile adhesive classified EN 12004 C1TE, with slip resistance, extended open time and good workability for specified interior and exterior wall and floor tiling.
Key features
- EN 12004 C1TE tile-adhesive classification
- Slip resistance and extended open time
- Consistent adhesion under exterior conditions
- Thixotropic, easy-to-trowel workability
- Single-component premixed formulation in grey or white
Applications
- Interior and exterior wall tiling
- Small and medium floor tiles
- Marble, granite, ceramic and homogeneous tiles
- Concrete, cement plaster, brickwork and ALC blockwork
- Properly primed gypsum board, drywall and cementitious waterproofing surfaces
Selection guidance
Weberset 303 is a general C1TE tile adhesive for the small and medium tiles specified in its Product Sheet. Use the appropriate higher-class product for large, heavy or C2/S1-specified work.
Browse the Weber product range or other tile adhesives. Refer to the latest official Product Sheet attached to this page for technical values, application method and limitations.
Not Sure Which to Choose? These Guides Will Help
Tile Adhesive vs Cement-Sand Mix: Which Is Bett...
膠沙（瓷磚膠）同英泥沙有咩分別？大板磚點解一定要用膠沙？比較黏結強度、價錢、施工方法同常見失敗案例。
Tile Adhesive vs Cement-Sand Mix: Which Is Bett...
膠沙（瓷磚膠）同英泥沙有咩分別？大板磚點解一定要用膠沙？比較黏結強度、價錢、施工方法同常見失敗案例。
C1 vs C2 Tile Adhesive: Your Tile Type Decides
C1 tile adhesive for standard ceramic tiles (≥0.5 MPa). C2 for porcelain, large format and outdoor tiles (≥1.0 MPa). Compare EN 12004 grades, common mistakes, and product recommendations.
C1 vs C2 Tile Adhesive: Your Tile Type Decides
C1 tile adhesive for standard ceramic tiles (≥0.5 MPa). C2 for porcelain, large format and outdoor tiles (≥1.0 MPa). Compare EN 12004 grades, common mistakes, and product recommendations.
瓷磚膠完全指南：EN 12004 全級別分類解說
EN 12004 瓷磚膠分類完全指南：C1/C2水泥基膠沙、D類即用膠漿、R類環氧樹脂膠，附T/E/F/S1/S2附加標記詳解。華興全線22款瓷磚膠產品對照表，幫你揀啱適合嘅膠沙。
瓷磚膠完全指南：EN 12004 全級別分類解說
EN 12004 瓷磚膠分類完全指南：C1/C2水泥基膠沙、D類即用膠漿、R類環氧樹脂膠，附T/E/F/S1/S2附加標記詳解。華興全線22款瓷磚膠產品對照表，幫你揀啱適合嘅膠沙。
